Pickleball ATP: How the Around-the-Post Shot Works

An ATP becomes available when the opponent pulls the ball far enough outside the sideline that you can send your reply around the net post instead of back over the net. The key skill is not swinging harder. It is recognizing when the geometry has changed.

The 2026 USA Pickleball rulebook allows a legal return to travel around the net post. The ball does not need to pass over the net if the path around the post is available and the return lands in bounds.

The ATP geometry test

Think of the net post as the obstacle that normally blocks a direct low path into the opponent’s court. A wide angled dink can move the ball far enough outside the sideline that the post is no longer between your paddle and the target.

GREEN: the bounce carries clearly outside the sideline and past the post, giving you a visible lane back into the court.

YELLOW: you are wide, but the post still blocks the lane. Forcing the ATP now often means contacting too early or trying to bend a ball around an obstacle that is still there.

RED: you are reaching, late, or cannot see an in-bounds target. Play a conventional recovery instead of treating “wide” as automatically meaning ATP.

Let the ball create the angle

Recent ATP instruction consistently makes the same practical point: the shot usually comes from a sharply angled dink or drop that pulls you outside the court. If you take the ball too early, the net post may still be in the way. Letting the ball travel farther can actually improve the shot because it opens the lane.

This is different from normal dink positioning, where you often want to take the ball early and protect court position. On an ATP opportunity, a little patience can create a better angle.

Contact and swing

Get outside the ball and keep the swing directional rather than vertical. You are not trying to clear the net, so you do not need the same upward margin as a normal cross-court dink. Your job is to send the ball through the open lane around the post and back into the opponent’s court.

A compact controlled swing is usually enough. The ball can travel below net height on an ATP because it is going around the post rather than over the net.

Choose the target before you swing

Two targets are especially useful. The open sideline lane gives you a simple in-bounds target with little need to redirect. Behind the near opponent can be effective if that player has moved toward the middle expecting a conventional recovery.

Do not chase the tiniest possible angle. An ATP that lands safely inside the court still forces the opponents to defend a ball arriving from outside their normal visual field.

ATP vs. Erne: the simple distinction

An Erne changes where the player volleys from: outside the sideline near the net. An ATP changes the ball’s path: around the net post. One is primarily a positioning attack; the other is primarily a geometry opportunity created by a wide ball.

They can look similar because both happen near the net post, but the recognition cues are different. For the Erne, read the opponent’s likely line ball before contact. For the ATP, read how far the ball travels outside the sideline after the bounce.

A practical ATP drill

Feed alternating cross-court dinks: some stay inside the sideline, some pull the hitter clearly outside. The hitter must call normal or ATP before swinging. Only the genuinely wide ball should trigger the ATP attempt.

This trains the part that matters most: recognizing when the post has actually stopped blocking the lane.

The main takeaway

The ATP is a shot you receive permission to hit from the geometry of the rally. Wait for the ball to travel wide enough, get outside it, choose a visible in-bounds lane, and swing through that lane. If the net post still blocks the target, the ATP is not ready yet.

Related guides

ATPs often begin with a wide ball created during crosscourt dinking. Another advanced sideline attack is the Erne, but the two shots use different positioning and legal constraints.

ATP drill progression

The best ATP drill is not simply feeding the ball wider and wider until you can hit around the post. A useful practice progression teaches you to recognize when the lane is actually open, arrive outside the ball in balance, control the target and recover for the next shot.

This is the practice companion to our pickleball ATP guide, which owns the rules, geometry and basic technique. Here the progression is SEE → WAIT → MOVE → AIM → DECIDE → RECOVER → TRANSFER.

What to score in ATP practice

Track four things separately: recognition (was the lane genuinely available?), balance (did you arrive under control?), target (did the ball return safely in bounds?) and recovery (were you ready for the next ball?). A spectacular winner after a poor decision should not score as a perfect rep.

Drill 1: Find the open lane without hitting

Have a partner feed crosscourt dinks at different widths. Do not hit an ATP yet. Move with the ball and call closed while the post still blocks a useful path or open when the bounce has carried far enough outside the sideline to reveal a direct lane into the court.

This isolates the recognition problem. The ATP is created by geometry; trying to manufacture it while the post is still in the way usually leads to a forced contact.

Drill 2: Wait for the ball to travel

Use predictable wide feeds. Let the ball travel far enough that you can get outside it instead of rushing to take it early. Freeze at the intended contact point for a moment before catching or softly returning the ball.

The goal is to feel how ATP timing differs from a normal dink. Taking dinks early is often valuable, but an ATP opportunity can improve when patience opens the angle around the post.

Drill 3: Safe-lane ATPs

Now hit the shot. Mark a generous in-bounds target near the sideline rather than aiming for a tiny highlight-reel angle. Feed ten repeatable wide balls and score how many ATPs travel through the open lane and land safely inside the target area.

Because the ball is traveling around rather than over the net post, you do not need to add unnecessary height. Use a compact directional swing through the visible lane.

Drill 4: Normal dink or ATP?

The feeder now mixes ordinary crosscourt dinks with balls that genuinely create an ATP. Before contact, the hitter calls normal or ATP. Award one decision point before scoring execution.

This matters because “wide” is not the same as “ATP available.” The post may still block the lane, or your contact may be too stretched to attack reliably. Forcing the special shot on every wide feed trains the wrong habit.

Drill 5: Two ATP targets

Once the basic lane is reliable, alternate between two larger targets: a safe sideline window and space behind a near opponent who has shifted toward the middle. Call the target before swinging.

Do not shrink the targets until accuracy is stable. The ATP already makes the opponent defend a ball arriving from an unusual direction; you do not need a line-clipping winner for the shot to be useful.

Drill 6: ATP plus recovery ball

After the ATP, the feeder immediately sends one controlled reply. The hitter must recover enough balance and court awareness to play that ball. Score the rep only if both the ATP and the recovery action are functional.

This removes the habit of admiring the ATP. If opponents anticipate the shot, they may defend it. Our ATP defense guide shows the kinds of responses you should expect from the other side.

Drill 7: Create and recognize ATPs in live dinking

Finish with crosscourt dink points or skinny singles. The ATP is optional. Give a bonus point only when the player correctly recognizes a real ATP lane and executes a legal in-bounds attempt. A forced ATP from a closed lane earns no bonus even if the opponent misses.

For an extra layer, allow the other player to use wide dinks deliberately to create the opportunity. That connects ATP practice to crosscourt target selection instead of treating the shot as an isolated trick.

Troubleshooting

ProblemReturn to
You attempt ATPs while the post still blocks the laneOpen-or-closed recognition
You reach and lose balanceWait-and-freeze timing
You hit flashy but low-percentage anglesSafe-lane target
You try an ATP on every wide dinkNormal-or-ATP decision drill
You can only hit one predictable locationTwo-target drill
You stop after the ATPATP plus recovery ball
The shot disappears in gamesLive crosscourt dink points

A simple 20-minute ATP session

  • 3 minutes: open-or-closed recognition without hitting.
  • 3 minutes: wait-and-freeze contact positioning.
  • 4 minutes: safe-lane ATPs.
  • 4 minutes: normal-or-ATP random feeds.
  • 6 minutes: live crosscourt dink points with recovery.

This is an editorial practice template rather than a validated training dosage. Adjust volume to your level and court time. If you want a broader partner session around it, use our two-person drill guide.

The progression

SEE → WAIT → MOVE → AIM → DECIDE → RECOVER → TRANSFER. First learn to see when the post is no longer blocking the path. Then arrive outside the ball, hit a generous target, reject bad ATP opportunities, recover after contact and finally let the shot appear naturally in live dinking.

How to Defend an ATP: DENY → READ → COVER → RETURN → RECOVER

DENY: ATP defense starts before the opponent swings. Repeatedly feeding extreme crosscourt dinks can create the outside lane for them, so use the middle or a less severe angle when you are stretched.

READ: recognize the geometry early. A ball that pulls the opponent outside the sideline plus an attacker who keeps moving around the post is the cue to prepare before contact instead of reacting after the ATP is already on its way.

COVER: protect the open ATP lane without abandoning the rest of the court. Your partner should shift with you so one player does not over-cover the sideline while leaving a simple central reply open.

RETURN: when you are under pressure, block or lift first. Counter only if the ball reaches a manageable contact window and you are balanced. A good defensive reply is often one that makes the ATP hitter recover back toward the court.

RECOVER: do not admire the save. Rebuild normal spacing immediately and be ready for the next ball.

ATP-defense practice progression

Progress from a geometry-call drill, to predictable ATP lane blocks/lifts, to live wide-dink rallies where the outside player may hit either a normal dink or an ATP. Score early recognition and recovery, not just spectacular saves.

Sources

USA Pickleball: 2026 Official Rulebook
The Dink: How to Hit an ATP
PickleballMAX: Around-the-Post Shot

Similar Posts